ReP USP - Resultado da busca

Artigo de periodico
Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil) (2024)
Maia, Rafael Rocha ; Gonçalves, Lucas Nalesso; Darin Filho, Gaspar ; Neiva, Augusto Camara ; Beneduce Neto, Flavio ; Azevedo, Cesar Roberto de Farias ; Landgraf, Fernando José Gomes
Source: Materials Research. Unidades: EP, IF
Subjects: ESCÓRIA, ARTEFATOS (ARQUEOLOGIA), COMPOSIÇÃO QUÍMICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MAIA, Rafael Rocha et al. Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil). Materials Research, v. 27, p. 11 2024, 2024Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2023-024. Acesso em: 30 abr. 2024.
APA
Maia, R. R., Gonçalves, L. N., Darin Filho, G., Neiva, A. C., Beneduce Neto, F., Azevedo, C. R. de F., & Landgraf, F. J. G. (2024). Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil). Materials Research, 27, 11 2024. doi:10.1590/1980-5373-MR-2023-0248
NLM
Maia RR, Gonçalves LN, Darin Filho G, Neiva AC, Beneduce Neto F, Azevedo CR de F, Landgraf FJG. Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil) [Internet]. Materials Research. 2024 ; 27 11 2024.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-024
Vancouver
Maia RR, Gonçalves LN, Darin Filho G, Neiva AC, Beneduce Neto F, Azevedo CR de F, Landgraf FJG. Microstructural Characterisation of Ti and V-containing Synthetic Slags Mimicking the Chemical Composition of the Slag Inclusions of Ferrous Artefacts Produced in the Iron Factory of São João de Ipanema (XIX century, Brazil) [Internet]. Materials Research. 2024 ; 27 11 2024.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-024
Artigo de periodico
Fracture Toughness of Vaccum Sintered AISI M3:2: High Speed Steels (2024)
Silva Junior, Moisés Rodrigues da ; Silva, Wanderson Santana da ; Neves, Maurício David Martins das ; Goldenstein, Hélio ; Araujo Filho, Oscar Olimpio de
Source: Materials Research. Unidade: EP
Subjects: METALURGIA DO PÓ, AÇO RÁPIDO, SINTERIZAÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SILVA JUNIOR, Moisés Rodrigues da et al. Fracture Toughness of Vaccum Sintered AISI M3:2: High Speed Steels. Materials Research, v. 26, p. 7 , 2024Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2023-0179. Acesso em: 30 abr. 2024.
APA
Silva Junior, M. R. da, Silva, W. S. da, Neves, M. D. M. das, Goldenstein, H., & Araujo Filho, O. O. de. (2024). Fracture Toughness of Vaccum Sintered AISI M3:2: High Speed Steels. Materials Research, 26, 7 . doi:10.1590/1980-5373-MR-2023-0179
NLM
Silva Junior MR da, Silva WS da, Neves MDM das, Goldenstein H, Araujo Filho OO de. Fracture Toughness of Vaccum Sintered AISI M3:2: High Speed Steels [Internet]. Materials Research. 2024 ; 26 7 .[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0179
Vancouver
Silva Junior MR da, Silva WS da, Neves MDM das, Goldenstein H, Araujo Filho OO de. Fracture Toughness of Vaccum Sintered AISI M3:2: High Speed Steels [Internet]. Materials Research. 2024 ; 26 7 .[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0179
Artigo de periodico
The potentialities of Raman and XPS techniques to evaluate the corrosion products formed on the 2198-T851 aluminium alloy exposed to sodium chloride solution (2023)
Ferreira, Murilo O. A ; Nascimento, João Pedro Lopes do ; Leite, Natália Bueno ; Siervo, Abner de ; Fernandes, Guilherme de Lima ; Vaz, Alfredo Rodrigues ; Gelamo, Rogerio Valentim ; Aoki, Idalina Vieira ; Moreto, Jéferson Aparecido
Source: Materials Research. Unidades: EP, EESC
Subjects: CORROSÃO, ESPECTROSCOPIA RAMAN, AERONÁUTICA, INDÚSTRIAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, Murilo O. A et al. The potentialities of Raman and XPS techniques to evaluate the corrosion products formed on the 2198-T851 aluminium alloy exposed to sodium chloride solution. Materials Research, v. 26, p. 1-13, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0453. Acesso em: 30 abr. 2024.
APA
Ferreira, M. O. A., Nascimento, J. P. L. do, Leite, N. B., Siervo, A. de, Fernandes, G. de L., Vaz, A. R., et al. (2023). The potentialities of Raman and XPS techniques to evaluate the corrosion products formed on the 2198-T851 aluminium alloy exposed to sodium chloride solution. Materials Research, 26, 1-13. doi:10.1590/1980-5373-MR-2022-0453
NLM
Ferreira MOA, Nascimento JPL do, Leite NB, Siervo A de, Fernandes G de L, Vaz AR, Gelamo RV, Aoki IV, Moreto JA. The potentialities of Raman and XPS techniques to evaluate the corrosion products formed on the 2198-T851 aluminium alloy exposed to sodium chloride solution [Internet]. Materials Research. 2023 ; 26 1-13.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0453
Vancouver
Ferreira MOA, Nascimento JPL do, Leite NB, Siervo A de, Fernandes G de L, Vaz AR, Gelamo RV, Aoki IV, Moreto JA. The potentialities of Raman and XPS techniques to evaluate the corrosion products formed on the 2198-T851 aluminium alloy exposed to sodium chloride solution [Internet]. Materials Research. 2023 ; 26 1-13.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0453
Artigo de periodico
Oxidation behavior of Si3N4-TiN composites at 1400 °C (2023)
Ferreira, T. S.; Carvalho, Flavio Machado de Souza ; Guedes-Silva, Cecília Chaves
Source: Materials Research. Unidade: IGC
Subjects: OXIDAÇÃO, NITRITOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
FERREIRA, T. S. e CARVALHO, Flavio Machado de Souza e GUEDES-SILVA, Cecília Chaves. Oxidation behavior of Si3N4-TiN composites at 1400 °C. Materials Research, v. 26, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2023-0195. Acesso em: 30 abr. 2024.
APA
Ferreira, T. S., Carvalho, F. M. de S., & Guedes-Silva, C. C. (2023). Oxidation behavior of Si3N4-TiN composites at 1400 °C. Materials Research, 26. doi:10.1590/1980-5373-MR-2023-0195
NLM
Ferreira TS, Carvalho FM de S, Guedes-Silva CC. Oxidation behavior of Si3N4-TiN composites at 1400 °C [Internet]. Materials Research. 2023 ;26[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0195
Vancouver
Ferreira TS, Carvalho FM de S, Guedes-Silva CC. Oxidation behavior of Si3N4-TiN composites at 1400 °C [Internet]. Materials Research. 2023 ;26[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0195
Artigo de periodico
Alternative Sample Preparation of Co-28Cr-6Mo to Avoid Strain-induced Phase Transformation (2023)
Cesarin, I. S.; Antunes, Luiz H. M. ; Darin Filho, Gaspar ; Ulsen, Carina ; Farina, Paula Fernanda da Silva
Source: Materials Research. Unidade: EP
Subjects: METALOGRAFIA, MUDANÇA DE FASE, COBALTO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CESARIN, I. S. et al. Alternative Sample Preparation of Co-28Cr-6Mo to Avoid Strain-induced Phase Transformation. Materials Research, v. 26, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2023-0080. Acesso em: 30 abr. 2024.
APA
Cesarin, I. S., Antunes, L. H. M., Darin Filho, G., Ulsen, C., & Farina, P. F. da S. (2023). Alternative Sample Preparation of Co-28Cr-6Mo to Avoid Strain-induced Phase Transformation. Materials Research, 26. doi:10.1590/1980-5373-MR-2023-0080
NLM
Cesarin IS, Antunes LHM, Darin Filho G, Ulsen C, Farina PF da S. Alternative Sample Preparation of Co-28Cr-6Mo to Avoid Strain-induced Phase Transformation [Internet]. Materials Research. 2023 ;26[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0080
Vancouver
Cesarin IS, Antunes LHM, Darin Filho G, Ulsen C, Farina PF da S. Alternative Sample Preparation of Co-28Cr-6Mo to Avoid Strain-induced Phase Transformation [Internet]. Materials Research. 2023 ;26[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0080
Artigo de periodico
Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel (2023)
Oliveira, Adriel P.; Figueira, Gustavo; Coelho, Reginaldo Teixeira ; Bolfarini, Claudemiro; Gargarella, Piter
Source: Materials Research. Unidade: EESC
Subjects: LASER, AÇO FERRAMENTA, ENGENHARIA DE PRODUÇÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
OLIVEIRA, Adriel P. et al. Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel. Materials Research, v. 26, p. 1-9, 2023Tradução . . Disponível em: http://dx.doi.org/10.1590/1980-5373-MR-2023-0250. Acesso em: 30 abr. 2024.
APA
Oliveira, A. P., Figueira, G., Coelho, R. T., Bolfarini, C., & Gargarella, P. (2023). Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel. Materials Research, 26, 1-9. doi:10.1590/1980-5373-MR-2023-0250
NLM
Oliveira AP, Figueira G, Coelho RT, Bolfarini C, Gargarella P. Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel [Internet]. Materials Research. 2023 ; 26 1-9.[citado 2024 abr. 30 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0250
Vancouver
Oliveira AP, Figueira G, Coelho RT, Bolfarini C, Gargarella P. Application of the Box-Behnken design in the optimization of laser powder bed fusion of H13 tool steel [Internet]. Materials Research. 2023 ; 26 1-9.[citado 2024 abr. 30 ] Available from: http://dx.doi.org/10.1590/1980-5373-MR-2023-0250
Artigo de periodico
Hydroxylation studies on high-solid load magnesia aqueous suspensions (2023)
Salomão, Rafael ; Fernandes, Leandro
Source: Materials Research. Unidade: EESC
Subjects: HIDROXILASE, MAGNÉSIO, SINTERIZAÇÃO, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SALOMÃO, Rafael e FERNANDES, Leandro. Hydroxylation studies on high-solid load magnesia aqueous suspensions. Materials Research, v. 26, p. 1-10, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0329. Acesso em: 30 abr. 2024.
APA
Salomão, R., & Fernandes, L. (2023). Hydroxylation studies on high-solid load magnesia aqueous suspensions. Materials Research, 26, 1-10. doi:10.1590/1980-5373-MR-2022-0329
NLM
Salomão R, Fernandes L. Hydroxylation studies on high-solid load magnesia aqueous suspensions [Internet]. Materials Research. 2023 ; 26 1-10.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0329
Vancouver
Salomão R, Fernandes L. Hydroxylation studies on high-solid load magnesia aqueous suspensions [Internet]. Materials Research. 2023 ; 26 1-10.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0329
Artigo de periodico
Study of Short Times Tempering for AISI D2 Cold Work Tool Steel (2023)
Conci, Maycolyn D.; Centeno, Dany Michell Andrade ; Goldenstein, Hélio ; Farina, Paula Fernanda da Silva
Source: Materials Research. Unidade: EP
Subjects: DIFRAÇÃO POR RAIOS X, MICROSCOPIA ELETRÔNICA DE VARREDURA, AÇO FERRAMENTA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CONCI, Maycolyn D. et al. Study of Short Times Tempering for AISI D2 Cold Work Tool Steel. Materials Research, v. 26, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2023-0059. Acesso em: 30 abr. 2024.
APA
Conci, M. D., Centeno, D. M. A., Goldenstein, H., & Farina, P. F. da S. (2023). Study of Short Times Tempering for AISI D2 Cold Work Tool Steel. Materials Research, 26. doi:10.1590/1980-5373-MR-2023-0059
NLM
Conci MD, Centeno DMA, Goldenstein H, Farina PF da S. Study of Short Times Tempering for AISI D2 Cold Work Tool Steel [Internet]. Materials Research. 2023 ; 26[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0059
Vancouver
Conci MD, Centeno DMA, Goldenstein H, Farina PF da S. Study of Short Times Tempering for AISI D2 Cold Work Tool Steel [Internet]. Materials Research. 2023 ; 26[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0059
Artigo de periodico
Microstructural characterization of U-7.5Nb-2.5Zr alloy after ageing and constrained fatigue (2023)
Morais, Nathanael Wagner Sales ; Mucsi, Cristiano Stefano; Fabrim, Zacarias Eduardo; Schön, Cláudio Geraldo ; Rossi, Jesualdo Luiz
Source: Materials Research. Unidade: EP
Subjects: MUDANÇA DE FASE, FADIGA DOS MATERIAIS, ELEMENTOS QUÍMICOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MORAIS, Nathanael Wagner Sales et al. Microstructural characterization of U-7.5Nb-2.5Zr alloy after ageing and constrained fatigue. Materials Research, v. 26 (suppl.1), p. 20230039, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2023-0039. Acesso em: 30 abr. 2024.
APA
Morais, N. W. S., Mucsi, C. S., Fabrim, Z. E., Schön, C. G., & Rossi, J. L. (2023). Microstructural characterization of U-7.5Nb-2.5Zr alloy after ageing and constrained fatigue. Materials Research, 26 (suppl.1), 20230039. doi:10.1590/1980-5373-MR-2023-0039
NLM
Morais NWS, Mucsi CS, Fabrim ZE, Schön CG, Rossi JL. Microstructural characterization of U-7.5Nb-2.5Zr alloy after ageing and constrained fatigue [Internet]. Materials Research. 2023 ; 26 (suppl.1) 20230039.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0039
Vancouver
Morais NWS, Mucsi CS, Fabrim ZE, Schön CG, Rossi JL. Microstructural characterization of U-7.5Nb-2.5Zr alloy after ageing and constrained fatigue [Internet]. Materials Research. 2023 ; 26 (suppl.1) 20230039.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2023-0039
Artigo de periodico
Nb2O5 Pellets with Inactive Biomass for Adsorption of Mn2+ Ions: Kinetic, Isothermal and Reuse Study (2023)
Giraldi, Tania Regina; Costa, Beatriz Caroline da; Silva, Marcos Martins; Santos, Allef Leite dos; Paris, Elaine Cristina; Figueiredo, Alberthmeiry Teixeira de; Rodriguez, Renata Piacentini
Source: Materials Research. Unidade: IQSC
Subjects: ADSORÇÃO, BIOMASSA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GIRALDI, Tania Regina et al. Nb2O5 Pellets with Inactive Biomass for Adsorption of Mn2+ Ions: Kinetic, Isothermal and Reuse Study. Materials Research, v. 26 (suppl. 1), p. e20220553, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0553. Acesso em: 30 abr. 2024.
APA
Giraldi, T. R., Costa, B. C. da, Silva, M. M., Santos, A. L. dos, Paris, E. C., Figueiredo, A. T. de, & Rodriguez, R. P. (2023). Nb2O5 Pellets with Inactive Biomass for Adsorption of Mn2+ Ions: Kinetic, Isothermal and Reuse Study. Materials Research, 26 (suppl. 1), e20220553. doi:10.1590/1980-5373-MR-2022-0553
NLM
Giraldi TR, Costa BC da, Silva MM, Santos AL dos, Paris EC, Figueiredo AT de, Rodriguez RP. Nb2O5 Pellets with Inactive Biomass for Adsorption of Mn2+ Ions: Kinetic, Isothermal and Reuse Study [Internet]. Materials Research. 2023 ;26 (suppl. 1) e20220553.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0553
Vancouver
Giraldi TR, Costa BC da, Silva MM, Santos AL dos, Paris EC, Figueiredo AT de, Rodriguez RP. Nb2O5 Pellets with Inactive Biomass for Adsorption of Mn2+ Ions: Kinetic, Isothermal and Reuse Study [Internet]. Materials Research. 2023 ;26 (suppl. 1) e20220553.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0553
Artigo de periodico
Prediction of elastic parameters of particle reinforced composites using finite element simulations (2023)
Schiavon, Fernando Luís ; Zanardi, Heloísa ; Zago, Igor Paganotto ; Angélico, Ricardo Afonso
Source: Materials Research. Unidade: EESC
Subjects: MÉTODO DOS ELEMENTOS FINITOS, MATERIAIS COMPÓSITOS, ENGENHARIA AERONÁUTICA
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
SCHIAVON, Fernando Luís et al. Prediction of elastic parameters of particle reinforced composites using finite element simulations. Materials Research, v. 26, p. 1-11, 2023Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0475. Acesso em: 30 abr. 2024.
APA
Schiavon, F. L., Zanardi, H., Zago, I. P., & Angélico, R. A. (2023). Prediction of elastic parameters of particle reinforced composites using finite element simulations. Materials Research, 26, 1-11. doi:10.1590/1980-5373-MR-2022-0475
NLM
Schiavon FL, Zanardi H, Zago IP, Angélico RA. Prediction of elastic parameters of particle reinforced composites using finite element simulations [Internet]. Materials Research. 2023 ; 26 1-11.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0475
Vancouver
Schiavon FL, Zanardi H, Zago IP, Angélico RA. Prediction of elastic parameters of particle reinforced composites using finite element simulations [Internet]. Materials Research. 2023 ; 26 1-11.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0475
Artigo de periodico
Study of the Effect of Nitrogen on Corrosion, Wear resistance and Adhesion Properties of DLC Films Deposited on AISI 321H (2022)
Almeida, Larissa Solano de ; Pereira, M S; Antonio Junior, C. A; Silva, F. C. ; Ramirez, Oscar Mauricio Prada ; Schön, Cláudio Geraldo ; Melo, Hercílio Gomes de ; Manfrinato, Marcos Dorigão ; Rossino, Luciana Sgarbi
Source: Materials Research. Unidade: EP
Subjects: NITROGÊNIO, CORROSÃO, DESGASTE CORROSIVO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
ALMEIDA, Larissa Solano de et al. Study of the Effect of Nitrogen on Corrosion, Wear resistance and Adhesion Properties of DLC Films Deposited on AISI 321H. Materials Research, v. 25, p. 11 , 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0141. Acesso em: 30 abr. 2024.
APA
Almeida, L. S. de, Pereira, M. S., Antonio Junior, C. A., Silva, F. C., Ramirez, O. M. P., Schön, C. G., et al. (2022). Study of the Effect of Nitrogen on Corrosion, Wear resistance and Adhesion Properties of DLC Films Deposited on AISI 321H. Materials Research, 25, 11 . doi:10.1590/1980-5373-MR-2022-0141
NLM
Almeida LS de, Pereira MS, Antonio Junior CA, Silva FC, Ramirez OMP, Schön CG, Melo HG de, Manfrinato MD, Rossino LS. Study of the Effect of Nitrogen on Corrosion, Wear resistance and Adhesion Properties of DLC Films Deposited on AISI 321H [Internet]. Materials Research. 2022 ; 25 11 .[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0141
Vancouver
Almeida LS de, Pereira MS, Antonio Junior CA, Silva FC, Ramirez OMP, Schön CG, Melo HG de, Manfrinato MD, Rossino LS. Study of the Effect of Nitrogen on Corrosion, Wear resistance and Adhesion Properties of DLC Films Deposited on AISI 321H [Internet]. Materials Research. 2022 ; 25 11 .[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0141
Artigo de periodico
Physico-chemical characterization of tropical wood species for use and production of grilling planks (2022)
Guedes, Ulysses Harley; Nascimento, Maria Fátima do; Silva, Diogo Aparecido Lopes; Christoforo, André Luis ; Lahr, Francisco Antonio Rocco ; Panzera, Túlio Hallak; Aquino, Vinicius Borges de Moura; Saraiva, Raisse Layane de Paula
Source: Materials Research. Unidade: EESC
Subjects: MADEIRA, DENSIDADE DA MADEIRA, CHURRASQUEIRAS, ESTRUTURAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
GUEDES, Ulysses Harley et al. Physico-chemical characterization of tropical wood species for use and production of grilling planks. Materials Research, v. 25, p. 1-8, 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2021-0206. Acesso em: 30 abr. 2024.
APA
Guedes, U. H., Nascimento, M. F. do, Silva, D. A. L., Christoforo, A. L., Lahr, F. A. R., Panzera, T. H., et al. (2022). Physico-chemical characterization of tropical wood species for use and production of grilling planks. Materials Research, 25, 1-8. doi:10.1590/1980-5373-MR-2021-0206
NLM
Guedes UH, Nascimento MF do, Silva DAL, Christoforo AL, Lahr FAR, Panzera TH, Aquino VB de M, Saraiva RL de P. Physico-chemical characterization of tropical wood species for use and production of grilling planks [Internet]. Materials Research. 2022 ; 25 1-8.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0206
Vancouver
Guedes UH, Nascimento MF do, Silva DAL, Christoforo AL, Lahr FAR, Panzera TH, Aquino VB de M, Saraiva RL de P. Physico-chemical characterization of tropical wood species for use and production of grilling planks [Internet]. Materials Research. 2022 ; 25 1-8.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0206
Artigo de periodico
Influence of welding energy on intergranular and pitting corrosion susceptibility of UNS S32205 duplex stainless-steel joints (2022)
Pereira, Henrique Boschetti ; Pimental, Tarcisio Henrique Carvalhaes; Silva, Carlos Alberto ; Panossian, Zehbour ; Azevedo, Cesar Roberto de Farias
Source: Materials Research. Unidade: EP
Subjects: CORROSÃO, AÇO INOXIDÁVEL DUPLEX, SOLDAGEM
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
PEREIRA, Henrique Boschetti et al. Influence of welding energy on intergranular and pitting corrosion susceptibility of UNS S32205 duplex stainless-steel joints. Materials Research, v. 25, p. 11 , 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2021-0488. Acesso em: 30 abr. 2024.
APA
Pereira, H. B., Pimental, T. H. C., Silva, C. A., Panossian, Z., & Azevedo, C. R. de F. (2022). Influence of welding energy on intergranular and pitting corrosion susceptibility of UNS S32205 duplex stainless-steel joints. Materials Research, 25, 11 . doi:10.1590/1980-5373-MR-2021-0488
NLM
Pereira HB, Pimental THC, Silva CA, Panossian Z, Azevedo CR de F. Influence of welding energy on intergranular and pitting corrosion susceptibility of UNS S32205 duplex stainless-steel joints [Internet]. Materials Research. 2022 ; 25 11 .[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0488
Vancouver
Pereira HB, Pimental THC, Silva CA, Panossian Z, Azevedo CR de F. Influence of welding energy on intergranular and pitting corrosion susceptibility of UNS S32205 duplex stainless-steel joints [Internet]. Materials Research. 2022 ; 25 11 .[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0488
Artigo de periodico
Oxide formation in a melt spun alloy in the Zr-Ni-Cu system (2022)
Campos Neto, Nelson Delfino de ; Déo, Leonardo Pratavieira; Mendes, Marcio Andreato Batista; Kaufman, Michael Joseph; Oliveira, Marcelo Falcão de
Source: Materials Research. Unidade: EESC
Subjects: VIDROS METÁLICOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CAMPOS NETO, Nelson Delfino de et al. Oxide formation in a melt spun alloy in the Zr-Ni-Cu system. Materials Research, v. 25, p. 1-6, 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2021-0594. Acesso em: 30 abr. 2024.
APA
Campos Neto, N. D. de, Déo, L. P., Mendes, M. A. B., Kaufman, M. J., & Oliveira, M. F. de. (2022). Oxide formation in a melt spun alloy in the Zr-Ni-Cu system. Materials Research, 25, 1-6. doi:10.1590/1980-5373-MR-2021-0594
NLM
Campos Neto ND de, Déo LP, Mendes MAB, Kaufman MJ, Oliveira MF de. Oxide formation in a melt spun alloy in the Zr-Ni-Cu system [Internet]. Materials Research. 2022 ; 25 1-6.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0594
Vancouver
Campos Neto ND de, Déo LP, Mendes MAB, Kaufman MJ, Oliveira MF de. Oxide formation in a melt spun alloy in the Zr-Ni-Cu system [Internet]. Materials Research. 2022 ; 25 1-6.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0594
Artigo de periodico
Electrochemical Properties of Iron Oxide Decorated Activated Carbon Cloth as a Binder-Free Flexible Electrode (2022)
Munhoz, Manuela Gobbo de Castro ; Rodrigues-Siqueli, A. C.; Fonseca, Beatriz Carvalho da Silva ; Marcuzzo, Jossano Saldanha ; Matsushima, J. T; Silva, Guilherme Frederico Bernardo Lenz e ; Baldan, Mauricio Ribeiro ; Amaral-Labat, Gisele Aparecida
Source: Materials Research. Unidade: EP
Subjects: ENERGIA, OXIDAÇÃO, FERRO, PROPRIEDADES ELETROQUÍMICAS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MUNHOZ, Manuela Gobbo de Castro et al. Electrochemical Properties of Iron Oxide Decorated Activated Carbon Cloth as a Binder-Free Flexible Electrode. Materials Research, v. 25, p. 9 , 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0142. Acesso em: 30 abr. 2024.
APA
Munhoz, M. G. de C., Rodrigues-Siqueli, A. C., Fonseca, B. C. da S., Marcuzzo, J. S., Matsushima, J. T., Silva, G. F. B. L. e, et al. (2022). Electrochemical Properties of Iron Oxide Decorated Activated Carbon Cloth as a Binder-Free Flexible Electrode. Materials Research, 25, 9 . doi:10.1590/1980-5373-MR-2022-0142
NLM
Munhoz MG de C, Rodrigues-Siqueli AC, Fonseca BC da S, Marcuzzo JS, Matsushima JT, Silva GFBL e, Baldan MR, Amaral-Labat GA. Electrochemical Properties of Iron Oxide Decorated Activated Carbon Cloth as a Binder-Free Flexible Electrode [Internet]. Materials Research. 2022 ; 25 9 .[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0142
Vancouver
Munhoz MG de C, Rodrigues-Siqueli AC, Fonseca BC da S, Marcuzzo JS, Matsushima JT, Silva GFBL e, Baldan MR, Amaral-Labat GA. Electrochemical Properties of Iron Oxide Decorated Activated Carbon Cloth as a Binder-Free Flexible Electrode [Internet]. Materials Research. 2022 ; 25 9 .[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0142
Artigo de periodico
Electrochemical and economic evaluation of the cocoa bean shell as a corrosion inhibitor in acidic medium (2022)
Carvalho, Mayara Cristina Fernandes de ; Almeida, Nayara Maria Santos de ; Silva, Iago Magella Fernandes Costa Rossi e ; Cotting, Fernando ; Aoki, Idalina Vieira ; Capelossi, Vera Rosa
Source: Materials Research. Unidade: EP
Subjects: AÇO CARBONO, CACAU, INIBIDORES DE CORROSÃO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
CARVALHO, Mayara Cristina Fernandes de et al. Electrochemical and economic evaluation of the cocoa bean shell as a corrosion inhibitor in acidic medium. Materials Research, v. 25, p. 1-13, 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2021-0125. Acesso em: 30 abr. 2024.
APA
Carvalho, M. C. F. de, Almeida, N. M. S. de, Silva, I. M. F. C. R. e, Cotting, F., Aoki, I. V., & Capelossi, V. R. (2022). Electrochemical and economic evaluation of the cocoa bean shell as a corrosion inhibitor in acidic medium. Materials Research, 25, 1-13. doi:10.1590/1980-5373-MR-2021-0125
NLM
Carvalho MCF de, Almeida NMS de, Silva IMFCR e, Cotting F, Aoki IV, Capelossi VR. Electrochemical and economic evaluation of the cocoa bean shell as a corrosion inhibitor in acidic medium [Internet]. Materials Research. 2022 ; 25 1-13.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0125
Vancouver
Carvalho MCF de, Almeida NMS de, Silva IMFCR e, Cotting F, Aoki IV, Capelossi VR. Electrochemical and economic evaluation of the cocoa bean shell as a corrosion inhibitor in acidic medium [Internet]. Materials Research. 2022 ; 25 1-13.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2021-0125
Artigo de periodico
Sustainable Carbon Xerogel in the Production of Electromagnetic Radar Absorbing Composites in the Ku-Band (2022)
Medeiros, Nila Cecília de Faria Lopes ; Medeiros, Leonardo Iusuti de ; Silva, Guilherme Frederico Bernardo Lenz e ; Boss, Alan Fernando Ney ; Gomes, Newton Adriano dos Santos; Sardinha, André Ferreira; Labat, Gisele Amaral
Source: Materials Research. Unidade: EP
Subjects: SUSTENTABILIDADE, CARBONO, NANOTUBOS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDEIROS, Nila Cecília de Faria Lopes et al. Sustainable Carbon Xerogel in the Production of Electromagnetic Radar Absorbing Composites in the Ku-Band. Materials Research, v. 25, 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0157. Acesso em: 30 abr. 2024.
APA
Medeiros, N. C. de F. L., Medeiros, L. I. de, Silva, G. F. B. L. e, Boss, A. F. N., Gomes, N. A. dos S., Sardinha, A. F., & Labat, G. A. (2022). Sustainable Carbon Xerogel in the Production of Electromagnetic Radar Absorbing Composites in the Ku-Band. Materials Research, 25. doi:10.1590/1980-5373-MR-2022-0157
NLM
Medeiros NC de FL, Medeiros LI de, Silva GFBL e, Boss AFN, Gomes NA dos S, Sardinha AF, Labat GA. Sustainable Carbon Xerogel in the Production of Electromagnetic Radar Absorbing Composites in the Ku-Band [Internet]. Materials Research. 2022 ; 25[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0157
Vancouver
Medeiros NC de FL, Medeiros LI de, Silva GFBL e, Boss AFN, Gomes NA dos S, Sardinha AF, Labat GA. Sustainable Carbon Xerogel in the Production of Electromagnetic Radar Absorbing Composites in the Ku-Band [Internet]. Materials Research. 2022 ; 25[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0157
Artigo de periodico
Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel (2022)
Apolinário, Raíra Chefer ; Daianezi, Isabela; Borges, Spyridion Haritos; Sousa, Lucíola Lucena de; Pinto, Haroldo Cavalcanti ; Mariano, Neide Aparecida
Source: Materials Research. Unidade: EESC
Subjects: AÇO INOXIDÁVEL, SOLIDIFICAÇÃO, LAMINADOS, MATERIAIS
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
APOLINÁRIO, Raíra Chefer et al. Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel. Materials Research, v. 25, p. 1-10, 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0235. Acesso em: 30 abr. 2024.
APA
Apolinário, R. C., Daianezi, I., Borges, S. H., Sousa, L. L. de, Pinto, H. C., & Mariano, N. A. (2022). Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel. Materials Research, 25, 1-10. doi:10.1590/1980-5373-MR-2022-0235
NLM
Apolinário RC, Daianezi I, Borges SH, Sousa LL de, Pinto HC, Mariano NA. Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel [Internet]. Materials Research. 2022 ; 25 1-10.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0235
Vancouver
Apolinário RC, Daianezi I, Borges SH, Sousa LL de, Pinto HC, Mariano NA. Effect of rapid solidification processing on the microstructure and corrosion of 316L austenitic stainless steel [Internet]. Materials Research. 2022 ; 25 1-10.[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0235
Artigo de periodico
Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites (2022)
Medeiros, Leonardo Iusuti de ; Medeiros, Nila Cecília de Faria Lopes ; Silva, Guilherme Frederico Bernardo Lenz e ; Lima, Rodrigo Gabas Amaro ; Amaral-Labat, Gisele Aparecida ; Boss, Alan Fernando Ney ; Baldan, Mauricio Ribeiro
Source: Materials Research. Unidade: EP
Subjects: INTERFERÊNCIA ELETROMAGNÉTICA, CARBONO, NANOTUBOS DE CARBONO
A citação é gerada automaticamente e pode não estar totalmente de acordo com as normas
ABNT
MEDEIROS, Leonardo Iusuti de et al. Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites. Materials Research, 2022Tradução . . Disponível em: https://doi.org/10.1590/1980-5373-MR-2022-0169. Acesso em: 30 abr. 2024.
APA
Medeiros, L. I. de, Medeiros, N. C. de F. L., Silva, G. F. B. L. e, Lima, R. G. A., Amaral-Labat, G. A., Boss, A. F. N., & Baldan, M. R. (2022). Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites. Materials Research. doi:10.1590/1980-5373-MR-2022-0169
NLM
Medeiros LI de, Medeiros NC de FL, Silva GFBL e, Lima RGA, Amaral-Labat GA, Boss AFN, Baldan MR. Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites [Internet]. Materials Research. 2022 ;[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0169
Vancouver
Medeiros LI de, Medeiros NC de FL, Silva GFBL e, Lima RGA, Amaral-Labat GA, Boss AFN, Baldan MR. Improved Microwave Absorption Performance with Sustainable Porous Carbon/Carbon Nanotube Composites [Internet]. Materials Research. 2022 ;[citado 2024 abr. 30 ] Available from: https://doi.org/10.1590/1980-5373-MR-2022-0169

USP Schools

ReP

Filtros

USP Schools

Departament

Authors

USP affiliated authors

Date published

Subjects

Grupo de pesquisa

Funding Agencies

Indexado em

Normalized affiliation

Non normalized affiliation

Countries of institutions of collaboration